This course fulfills the ground portion of your Flight Review, prepares you for the flight portion, and ensures you arrive confident and fully prepared to fly with your CFI.
This lesson covers the aerodynamics of a turn and key considerations such as overbanking tendencies, adverse yaw, maneuvering speed, and the Vg diagram.
How do airplanes stay level and predictable? This lesson dives into the three axes of rotation—pitch, roll, and yaw—and explains how aircraft stability is designed for safety and control.
Every single-engine airplane tends to turn one way or the other due to propeller forces. For most U.S.-manufactured airplanes, this tendency is to the left.
If you don’t stall, you can’t spin. Understand what causes stalls, why the critical angle of attack matters, and how we recognize and recover from stalls and spins.
This lesson reviews the structure of the regulations that govern aviation in the United States. Understanding this structure will help you find the answers to common regulation questions.
Pilot in Command Authority is one of the most important responsibilities you've ever had. It's also one that is very difficult to teach, and perhaps that's why we even measure hours.
This lesson covers the rules surrounding "BasicMed," which is an option for healthy pilots if they've held an aviation medical at any point after July 14, 2006.
ADs are used to notify aircraft owners and other interested persons of unsafe conditions and to specify the conditions under which the product may continue to be operated.
Visibility and Cloud Clearance are central to safe VFR operations and often get confused with basic VFR minimums.
The meaning of Category and Class depends on whether we are talking about "airmen" or "aircraft."
These are the flight rules that must be adhered to while operating an aircraft in the United States.
If you see a regulation that is in the 91.200s, it's about equipment.
In this lesson, we cover the regulations dealing with inoperative equipment and the procedural guidance provided by the latest Advisory Circular.
NTSB 830 are the rules that govern when and how to file reports if you are involved in an accident or an incident.
Get the Ground School app to access all this content and more.
Get Ground SchoolIn this lesson you will learn how airspace is charted and how to know exactly what airspace you're in, even if it seems like there is nothing on the chart at all.
Airport lighting is designed to give you the critical information you need to perform certain operations in daylight, the dark, or in limited visibility.
Understanding traffic patterns is extremely important to expedite the flow of traffic around the airport and to reduce collision hazards.
The Sectional aeronautical chart and the Terminal Area Chart are the backbones of the VFR charting system in the United States. They share a common legend and are packed with detailed information.
The Chart Supplement is published every 56 days and was formerly called the Airport / Facility Directory, or A/FD. This book contains essential information.
Military Training Routes are low altitude routes on which the military flies at speeds in excess of 250 knots. Including, in some cases, with unmanned aircraft.
This lesson will review Single Pilot Resource Management and help ensure that you are operating at your prime every time you fly. Over the years, I've researched how to distill procedures that work for commercial aviators into procedures that will work in general aviation. We call what we've learned "Bracketing Safety."
This lesson suggests some practical ways to apply the alphabet soup of acronyms we learn in training such as PAVE, IMSAFE, AROW, and more.
Professional pilots all perform a briefing of the taxi route before the airplane is moved. This is an opportunity to review the hot spots and the airport diagram for any potential hazards.
Standardizing your taxi operation can add safety to your flying and allow you to detect critical instrument errors before the airplane leaves the ground.
I often tell students that if you can't get in front of the airplane before it even starts moving, we've got problems. The pre-takeoff briefing is an opportunity to do just that. This lesson will teach you to standardize the process.
Takeoff callouts are a way to bring redundancy to a single pilot environment and tie your actions during takeoff directly to the briefing you just performed. This lesson teaches you standard takeoff callouts used by professional operators.
This lesson teaches the difference between checklists and do-lists and how to establish redundancy in a single-pilot environment.
Collision with other airplanes is a risk we all have to mitigate, no matter how skilled or experienced we are. Good solid clearing habits are the starting point to making sure you don't collide with another airplane.
GUMPS is a mnemonic device that covers the critical elements in the before-landing checklist. It should be performed twice before landing.
Steep turns are turns that use more than 30° of bank. This lesson teaches you how to balance the increased load factor, overbanking tendency, and speed during 45° bank turns.
Learning how much rudder to apply and when to apply it is part of the art of flying. Coordination exercises will help you master rudder control as it is used to offset adverse aileron yaw.
Get the Ground School app to access all this content and more.
Get Ground SchoolSlow flight is any speed less than normal cruise airspeed. Learn to control the airplane and manage the left-turning tendency of the engine at this edge of the envelope.
Minimum controllable airspeed is a skill-building exercise that will develop your ability to manage the left-turning tendencies while operating at the lowest edge of the flight envelope.
In this lesson you begin to get familiar with the stall characteristics of the airplane. You will learn the necessary reference points to maintain control of the airplane through the stall.
A power-off stall is meant to simulate getting slow on a landing approach. You must recognize the warnings and the onset of the stall and initiate a prompt and appropriate recovery.
A power-on stall is typically tested in one of two ways; one simulates an over-rotation on takeoff and the other simulates trying to clear terrain on departure.
Sometimes you'll be asked to demonstrate stalls in a bank. This is true of both Power-On and Power-Off stalls. This lesson teaches you how to leverage the overbanking tendency and avoid common errors.
Landings should be thought of in five distinct phases: the approach, the round out, the flare, the touchdown, and the rollout. In this lesson you will see the whole process before we break it down into each phase.
A stabilized approach will provide consistent conditions to set up a proper round out and subsequent landing technique. In this lesson you will learn the specifics of how to achieve this and the common errors I see on the flight line.
The round out timing and technique is one of the more dynamic parts of the landing. In this lesson, you will learn how to identify the perfect time to start the round out, and some of the common errors I typically see.
The flare is the process of transferring the weight of the airplane from the wings to the main wheels. Without a proper flare you will not properly protect the nose wheel of the airplane.
The proper touchdown has the longitudinal axis of the airplane aligned with and over the centerline of the runway. It's the touchdown that will take you from the flare to roll-out in a safe and controlled manner.
A side slip is a maneuver in which the aircraft is banked and the rudder is applied in opposite directions to allow the plane to move laterally while keeping the nose aligned with the runway or flight path.
Landing in a crosswind takes a number of techniques: crabs, slips, and constant analysis of your aimpoint, drift, and alignment.
It is very important to be able to accurately glide to a known spot on the ground. This is important for every landing and will also condition your understanding of your airplane's power-out capabilities.
A forward slip is an uncoordinated flight maneuver that exposes more form drag to the relative wind as the airplane moves forward along the flight path. Forward slips are used to lose altitude more rapidly without gaining airspeed.
A go-around, or rejected landing, is an alternative to any landing and should be considered the default. It's very difficult to salvage a bad landing; just go around. This lesson covers that procedure.
In this lesson you will build skills and confidence in aircraft handling at low airspeeds and altitudes.
Get the Ground School app to access all this content and more.
Get Ground SchoolEmergencies aren’t something we like to think about. Whether it's a loss of communication, an instrument failure, or some other issue, your ability to manage the situation can make all the difference.
The three inherent risks of flying a light airplane are fire, failure, and collision. No matter how skilled you are, these risks can’t be completely eliminated. The good news? You can be prepared. This lesson focuses on handling engine failures.
There are a few different reasons one might want to lose altitude as rapidly as possible. In this lesson, we cover the two accepted techniques typically used in a cabin fire.
If you see a fighter jet off your wingtip, remember they’re probably not there to admire your smooth landings. Keep calm, follow procedures, and you’ll have a great story to tell at the hangar later.
All considerations associated with emergency equipment and survival gear appropriate to the airplane and environment encountered during flight.
Ground School will bring you 20 years of expert CFI wisdom. Get $100 off, locked in for life.
Get Ground School